Air Handling Unit
Air Handling Unit
Cooling Capacity: 6~30HP
Air flow range within 330 to 25,000 lps (1,100 to 90,000 CMH) and up to a total static pressure of 2000 pa (8”W.G). It can handle both chilled water and direct expansion system. The PU foam insulation thickness can be 25mm and 50mm with density of 40kg/m3. Special customed design for non standard AHU upon customer request is available.
With Air Handling Unit (AHU)
Power Commercial Spaces
Fan discharge direction can be either horizontal or vertical (top and bottom).
Horizontal
Arrangement Unit
Vertical
Arrangement Unit
Strong And Rigid – Casing/Cabinet
Low energy consumption and no condensation due to high thermal insulation and airtight casings accordance to EN 1886 certified under EUROVENT or AHRI 1350 Certification. The frame channel design allows three identical pieces to be bolted together to form a composite corner piece to form rigid frame of the AHU.
Easily access to all the components as the panels may be removed from all units sections without compromising the unit rigidity which is ensured by the aluminum frame.
- Access door or service panel can be supplied with a swing type or removable panel type.
- The unit is mounted on galvanized steel base frame for easy handling and positioning.
- The latest improvement on Internal prole from square to round resulting easier cleaning of internal compartment.
Maximum Flexibility
Variable dimensioning features for flexible cabinet sizing (increment 100mm in height and width)
- Variable coil casing and drain pan material.
- Variable fan selection include forward-curved, backward curved and air foil, AC/EC plug fan.
- Variable frequency drive / Frequency inverter (VFD) and thermistor.
- Multiple section depth.
High Quality
Thermal Break Profile
It is constructed of two parts of extruded aluminum joint together with thermal barrier nylon strip. The nylon is sandwiching the inner and outer layers of extruded aluminum. The thermal bridging factor of the assembled ADM Air Handling Unit is designed to meet BS EN 1886, Class TB2. The thermal break profile only available for cabinet with 50mm thickness.
Better Air Filtration Quality
High quality and reliable Primary, Secondary, HEPA filters & Activated Carbon Filters available upon request for air filtration.
Additional Plus Point Features
Automatic Restart
Unit can be automatically restarted once the power supply is back to normal and keeping the last setting condition.
Self Diagnosis System
With sensors and intelligent control board, error can be detected through blinking LEDs.
EC Plug Fan
It boast better efficient, lower noise emission, compact yet robust. Selection for model with total static pressure of 1800Pa and below upon request.
Hygienic Grade Double Skin Modular Air Handling Unit
Produced with flexible features to meet indoor air quality, operating efficiency, sound level and installation requirement to meet the strict requirement of hygiene facilities. Available upon request.
Optional Add Ons
- VFD/ Frequency Inverter
- Heat Recovery Wheel
- Humidifier
- Mixing Box
- Sound Attenuator
